Windows maintains connectivity to the following networks:. All remaining networks are soft-disconnected, as described in the next section. This is also used to evaluate available networks that are not connected. Windows will not connect to a new network from which it would immediately soft-disconnect.
In Windows 10, version , build This policy setting determines if a computer can have multiple connections to the Internet, to a Windows domain, or to both. If multiple connections are allowed, the policy then determines how network traffic is routed. If this policy is set to 0 , a computer can have simultaneous connections to the Internet, to a Windows domain, or to both.
Internet traffic can be routed over any connection, including a cellular connection or any metered network. This was previously the Disabled state for this policy setting in builds of Windows before Windows 10, version , build This option was first available in Windows 8. If this policy is set to 1 , any new automatic Internet connection is blocked when the computer has at least one active Internet connection to a preferred type of network. The order of preference is as follows:.
Ethernet is always preferred when connected. Users can still manually connect to any network. This was previously the Enabled state for this policy setting in builds of Windows before Windows 10, version , build If this policy setting is set to 2 , the behavior is similar to when it is set to 1. However, if a cellular data connection is available, that connection will always stay connected for services that require a cellular connection.
When the user is connected to a WLAN or Ethernet connection, no Internet traffic is routed over the cellular connection. This option was first available in Windows 10, version If this policy setting is set to 3 , the behavior is similar to when it is set to 2.
When Windows decides that a network should no longer be connected, it does not immediately disconnect. Abrupt disconnections degrade the user experience without providing an appreciable benefit and are avoided when possible. As soon as Windows decides to soft-disconnect an interface, it informs the TCP stack that the network should no longer be used. The existing TCP sessions will continue uninterrupted, but new TCP sessions will use this interface only if explicitly bound or if no other interface routes to the desired destination.
This notification to the TCP stack generates a network status change. Networking applications should listen for these events and proactively move their connections to the new network, if possible.
Windows then checks the traffic level on the interface every 30 seconds. If the traffic level is above a certain threshold, no further action is taken. This allows ongoing active use of the interface, such as from a file transfer or VoIP call, to avoid disruption. When the traffic drops below this threshold, the interface will be disconnected. Applications that keep long-lived idle connections, such as an e-mail client, may be interrupted and should re-establish their connections over a different interface.
Windows automatically connects and then immediately soft-disconnects in one circumstance. When a PC first starts or resumes from standby, all interfaces simultaneously attempt to connect in order to ensure that the user obtains network connectivity as quickly as possible. If multiple interfaces successfully connect, Windows begins soft-disconnecting interfaces immediately. This policy is off by default for Windows 8, Windows 8. When this policy is enabled, Windows attempts to prevent a PC from being interconnected between a domain network and a non-domain network.
Enterprise administrators may use this when they are concerned about potential security breaches using a multi-homed machine as an attack point.
This policy does not affect system behavior when all connected networks route to the domain or when no connected network routes to the domain. Many Windows 8, Windows 8. However, manually connecting one will automatically cause the other to disconnect immediately. NOTE: Note that operation is not guaranteed when used with system environments other than the above or on homemade computers.
When connecting with IEEE If the computer has a switchable graphics function is to be switched, remember to stop display before switching the function.
If no sound is output after installation, check the Wireless Manager ME6. Operation is not guaranteed for all computers that meet the above conditions. Downloading and Installing the Software wmme When using the application without installing it in a PC, the function for sending audio simultaneous with video in Live mode cannot be used.
For a flat-panel display, images of x dots are displayed with the number of display dots of the flat-panel display. Click the Download button above and the "Software Licensing Agreement" window will appear. Select [Agree] and the installer will begin to download automatically. This will uncompress the installation files and create a folder named WMME6. Double-click " WMStart. The software starts up and operation is now possible using the same procedure as when the software was installed.
Web browser Safari 8. Telecom NZ Connect Me. Hewlett Packard Connection Manager. T-Mobile Internet Manager. PosiSoft Desktop Manager. ManageEngine WiFi Manager. MobileController Standard Edition. How to recognize and deal with a hacked WiFi. How to manage money on PC. How to manage a blog with Wordpress Secrets.
How to Increase Internet speed in Windows How to access a computer over the Internet. Twitter Facebook.
0コメント