Wintv 2500 update

Updated HEVC decoder which fixes issue that the decoder would only work under the user account it was first registered. Previously this only happened with Extended logging on. Fixed issue with second half of quadHD PCIe not being found in a previous beta version Adds BETA support for padding feature and more than one TV Tuner Recording and Scheduled recording updates Fixed issue where scheduled recordings could be missed with more than one tuner present, depending on the start and end time of previous recordings.

Fixed an issue checking for overlaps in sheduled recordings bug caused converting to local time twice. Scheduled recording logs WinTVRec-xxx. Lots fixes and improvements when you have multiple TV tuners resulting in conflicts and lost recordings Fixed issue with multiple instances of Capture Plugins appearing, causing multiple recordings to be able to be scheduled when there aren't enough tuners, which could cause a crash to show in Event Viewer.

Other bug fixes and improvements Updated driver hcw85bda 1. Fixed an issue with BullGuard anti virus blocking installation. This previously caused a hang in the installer as the decoder never registered. The hang was fixed in the previous build, but the filter wouldn't be registered still. HEVC decoder now digitally signed. DLL now digitally signed.

Install will just continue now. We will work on why the decoder can't be registered on some PC's and will be resolved in a future build.

It will always use this method if it detects Bitdefender on the PC. If Bitdefender isn't on the PC and it crashes during hcwpnp32, the next run of the installer will use the alternative method using prodinfo. Tidied up logging around creating Scanning Table entries in the database.

Removed confusing logging about Fake Services which always came up. Fixed exception if the remote or keyboard command for Mute was used in Quad Mode. Fixed mute button status could get out of sync in Quad Mode via keyboard command Showing Padding durations on the scheduler screen, so the user doesn't have to go into each recording to see what values they used.

The latest installer and binaries in this version have been uploaded and will be whitelisted shortly Changed the way WinTV v10 installer adds the windows exceptions to avoid an issue when Panda Anti Virus is installed which could stop installation half way through. Fixed issue with multiple quadHD's, if setup via the initial wizard channel mappings for the second half of the second card would not be created. Creating channel mappings on quadHD now much quicker Creating scanning tables at start of scan now much quicker Creating Suites now faster, so saving channels at the end of scan time much improved Deleting Channels at start of scan now much quicker Saving Channels at end of scan now much quicker.

Live TV will now Automatically start after scan has been run from the settings page, so long as there are channels in the channel list. Added a UI message during the second pause starting a scan, while the tuning tables are created so the app doesn't look like it's hung Fixed an issue if the user hit back after a scan, the new message could be left on screen.

Only showing the deleting channels UI message if there are actually channels to delete. Added tick box to delete all channels before performing a scan. The latest installer and binaries in this version have been uploaded and will be whitelisted shortly. Live TV will now Automatically start after scan has been run from the settings page as long as there are channels in the channel list. Added a UI message during the second pause starting a scan.

This pause is due to the tuning tables being created Fixed an issue where if the user hit 'Back' after a scan, the new message could be left on screen. Added new function ReloadPage to Wizard, to allow functions to be trigged when the page is reloading via pressing the back button. Items that would normally be setup on Page load, but the page isn't re-loaded when you hit back Only showing the 'deleting channels' UI message if there are actually channels to delete. In the Scan menu, added tick box 'Delete all channels' before performing a scan.

This allows the erasing of the channel database and creates a fresh channel list. Updated Hauppauge Digital Signature. Try to avoid a crash if the VMR9 renderer isn't functioning. In 'Advanced Options' you can still change to other decoders. Changed the way WinTV v10 installer adds the windows exceptions to avoid an issue when Panda Anti Virus is installed which could stop installation half way through.

Increased wait from 4 to 5 seconds before starting Extend transcode. Feedback welcome please send to: sdk hauppauge. The Hauppauge YouTube channel. Windows 10 Wake settings.

Then click 'Next' in 'Number', type 3 in 'Name' type 3 or maybe something like 'Cable box' click 'Add' click 'Next' and 'Next' Now you will have added analog channel 3 to your channel list.

WinTV 10 Gallery Four tuner picture-in-picture. Freeview channel scan. WinTV v10 main menu context menu. WinTV v10 Introduction click to play video. If your sound card does not have 5. Now you will have added analog channel 3 to your channel list.

You should see channel 3 listed. Make sure your PC is in Sleep and not Hybernate. For both the Starting and Ending channel use the channel number you want to add. Example, if you want to add Analog channel 3, then select 3 for both the Starting and Ending channel. Then click Scan. Since you are only scanning one channel, it should find this channel quickly and add it to the channel list. It's possible that the default audio decoder is not working in your PC.

After making changes close the Primary applet and open the WinTV application. This can be caused by a corrupt Channel database so you will need to uninstall and reinstall.

Then download the latest version of Wintv7 located in the support section of the website and reinstall note: you must have your original CD to validate the download. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. Code 52 ". In device manager right click the Hauppauge product under Sound Video and Game Controllers with the exclamation mark and select Uninstall.

On the Confirm window please check the box for "Delete the driver software for this device" and click OK. Take a look after a few minutes if the drivers are installed automatically properly under Sound Video and Game Controllers. Download Prodinfo.

The driver for the device must be installed in order to run Prodinfo. Supports the latest Hauppauge TV tuners. WinTV v10 Introduction click to play video.

Wipe out your channel database and rescan for channels click to play video. How to setup an analog video source Click to play video. How to setup an analog video source channel 3 Click to play video. How to change the battery in a Hauppauge remote control click to play video.