Delta shopmaster tool set

No rust on the bed. Includes everything in the pictures. Includes leg kit. If you're looking to start turning as a hobby, this lathe is perfect. Takes little space in the shop or garage. It's not that heavy where it can still be moved. Motor has plenty of torque for a small lathe. Turns bowls up to Variable speed and reverse; key t. Excellent condition, works great. Stand sold separately.

Comes with original owners manual and wrench. The headstock spindle shaft has standard 1"-8TPI spindle threads, a 2 Morse t. Delta Midi lathe , , needs capacitor for motor.

Variable Speed Midi-Lathe, plus accessories. This lathe is not currently running, it was when I bought it, however the control box had been broken when the unit was previously dropped prior to me purchasing the item.

I subsequently ordered and bought all of the appropriate replacement pieces from Delta what a pain however, there is no wi. This is a Delta Midi Lathe It has been used moderately and is in excellent condition.

Many woodworking shops don't have a lathe, most likely because of cost or space. But the arrival of a new category of small lathes has made cost and space less of an issue. These machines--often called midi -lathes--are generally bigger and beefier than the so-called mini lathes, yet they're smaller than f.

Posted: 1 year ago. City: Orlando, FL. City: Boone, NC. City: Chico, CA. City: Fargo, ND. Posted: 2 years ago. City: Skagit, WA. City: Bozeman, MT. City: Eastern Shore, MD.

City: Indianapolis, IN. City: Northern Michigan, MI. Posted: 3 years ago. City: St. Cloud, MN. A dust bag is also included if you want to set it up with your shop vac. With 3. Like the previous pick, it is backed by a 3-year warranty.

As two miter saws from the same manufacturer, they have a few similarities, such as the following:. Both the Delta Shopmaster SL and the SL have an electric brake, which is a mechanism that almost instantly stops the blade within a few seconds so you can remove it and change to another blade that you like.

Repetitive cutting is when an electric brake becomes useful — if you make successive cuts then you need the blade to fully stop quickly to make the next cut. This would be useful for job sites and when keeping up with short deadlines.

The Delta Shopmaster SL and the SL both have dust extraction capability, since they have dust ports that can be connected to the appropriately-sized Shop-Vac adapter. Keeping your work area dust-free or at least with minimal dust count is not only a requirement for most job sites, but is also a way to make the air healthier. In terms of accuracy, both the Delta Shopmaster SL and the SL have a convenient laser guide that will help you get the best cut possible.

A laser guide is a plus point for those who have difficulty reading the tool guides all the time, especially if they are working in a low-visibility or low-light room. By having a laser guide, it will increase productivity for the operator and save time. Both the Delta Shopmaster SL and the SL are backed by a 3-year warranty on the tool to give you peace of mind.

While they do share many similarities, as two different models, they have a couple of differences that make them stand apart from each other, such as the following:.

The Delta Shopmaster SL weighs Although both are on the lightweight side, the SL is much better in terms of portability. When choosing a good miter saw, you have to keep in mind which features you value most, especially if you want to work between job sites or move the unit from room to room. A portable miter saw should be one with less weight, but that is still stable when you place it on a workbench.

In this case, the SL has the upper hand when it comes to moving from one area to another, allowing for work flexibility. The single-bevel Shopmaster SL can only bevel left up to 45 degrees while the SL is a dual-bevel unit that has left 45 degrees and right 50 degrees capacities.

If you want a dual-bevel capacity unit, then the Shopmaster SL is a great choice for you. Despite being a inch miter saw, the Delta Shopmaster SL can cut up to 12 inches for its cross-cut ability while the SL has up to Simply put, if you want a better cutting capacity when working with larger workpieces, the SL is a better tool for you.

Nonetheless, I still applaud the Delta Shopmaster SL for having a cross-cut capacity of 12 inches despite being a inch miter saw, which is something not often seen in miter saws of the same class. When choosing between these models, you should consider the materials you will be working on and their typical lengths.